Jerol Passively Safe Sign & Signal Posts - Non-Energy Absorption (NE)

Bespoke Product

Talk to us for more information about this product

oldbury@mallatite.co.uk or by phone 0121 557 0234

sales@mallatite.co.uk or by phone +44 (0)1246 593 280

scotland@mallatite.co.uk or by phone 0141 812 5121

Product Description

“The Government safety target is to reduce the number of road accident injuries and fatalities by 40%. If you commission Jerol poles, we just might reach it”

  • Crash friendly

  • Extremely durable

  • Easy to install and replace with ground socket

  • Great electrical insulator

  • UV stable

  • Over 50 crash tests performed

  • 60+ years service life

  • Weather resistant

  • Easy post identification and tracking

  • Jerol posts are easy to install

So what are Jerol posts and why are they so good?

 

Jerol posts are manufactured in Sweden by a patented process from glass fibre composite, and comply fully with the latest European Standard on passive safety, BS EN12767. The process is fully computer controlled ensuring that the highest standards of quality control are maintained. All posts are designed and certified to fully comply with the wind load classification and relevant deflection criteria contained in BS EN 12899-1.

  

 

 

 

 

 

 

 

 

 

 

Jerol sign and signal posts are extremely durable, a great electrical insulator, weather and
UV-resistant, plus boast a service life estimated to exceed 60 years!

Range of passive safety classifications

We have a full range of both NE and HE Jerol Signposts.

 

 

 

Jerol NE posts are classified to 100:NE:2

NE or No Energy - The car loses minimal speed in the impact.
100 kph rating – exit speed is between 70kph and 100 kph in a 100kph test.The NE Jerol post is designed to shear or breakaway on impact, and works best in the verges of motorways, dual carriageways and single carriageway roads.

  • Steel ground socket for easy replacement
  • Supplied in RAL 7023 grey, other colours available
  • Diameters 114, 140, 168, 219 and 273mm
  • Door and base compartment options
  • Fast and efficient installation

  •  

 

 

BS EN 12767 impact test at 100kph into a 219 diameter Jerol NE sign post

 

 

 

 

 

 

Jerol HElix posts are classified to 70:HE:2 / 70:HE:1

HE or High Energy - The car is significantly arrested or slowed in an impact
70 kph rating - exit speed is less than 4 kph and may well be totally halted.
The HElix Jerol post is designed to bend around and flatten under the car bringing it to a relatively gradual halt. The post remains embedded in the ground and will not shear or break free. This ability to stop or almost stop a vehicle at medium speeds make them very suitable for town use to safeguard pedestrians.

  • Steel ground socket for easy replacement
  • Supplied in RAL 7023 grey, other colours available
  • Diameter 140mm with 70:HE:2 classification
  • Diameter 168 and 219mm with 70:HE:1 classification
  • Door and base compartment options
  • Fast and efficient installation

 

BS EN 12767 impact test at 70kph into a 219 diameter Jerol HE sign post

 

 

 

 

 

 

 

Jerol Signal Poles are classified to 100:NE:2

NE or No Energy - The car loses minimal speed in the impact.
100 kph rating – exit speed is between 70kph and 100 kph in a 100kph test.
The Jerol signal pole is designed to shear or breakaway on impact, and works best in the verges of 40+mph roads.

 
  • Hollow centre for routing cables and disconnections systems.
  • Steel ground socket for easy replacement
  • Supplied in RAL 7023 grey, other colours available
  • Door and base compartment options
  • Diameters 114, 140, 168 and 219mm
  • Fast and efficient installation

 

BS EN 12767 impact test at 100kph into a 219 diameter Jerol NE sign post

 

 

 

 

Doors and base compartment

If required a base compartment is provided, 1.0m above ground level. The door is manufactured from stainless steel and is powder coated to match the colour of the post. The aperture has a rubber seal and the door has a bonded foam lining to provide a watertight seal and good electrical insulation.

 

Foundation Socket

The best way to install Jerol posts is with our foundation socket, making installation and replacement quick and easy - in just one visit*.

To install, simply excavate to the required depth, lower the socket into position and back ll. Then insert the post into the socket and align with the supplied plastic wedges. Fill the socket with sharp sand and nish with a mortar cap.

Following an incident the socket remains in place allowing you to pull out the damaged pole and quickly install a replacement.

For posts requiring an electrical connection, we’ve designed our foundation sockets to be compatible with a variety of disconnection systems.

* Subject to appropriate ground and loading conditions.

 


 

 

 

 

  

 

Accreditations

Fully ISO 9001, 14001 & 18001 certified by BSI across all our sites. We are also accredited to ISO 17025:2005, giving us the ability to test products ‘in-house’, and in line with UMSUG guidelines, greatly reducing the time needed to bring new unmetered products to market. We are also proud members of Members of the ARTSM, HEA, NHSS, ILP and HERS